Bates Numbering for Pro Se Litigants: What It Is and How to Add It Free
Someone told you to "Bates stamp" your documents, and you have no idea what that means. You're not alone. It sounds technical, but it is just a way to give every page its own ID number. This guide explains what Bates numbers are, when you need them, and how to add them for free.
What a Bates number is
A Bates number is an ID stamped on a page, usually in a bottom corner. Each page gets its own number, and the numbers go up by one.
A typical Bates number has two parts:
- A prefix. A short tag that says whose documents these are. Many people use their last name or a short case word, such as
DOEorDOE-PROD. - A number. Usually padded with zeros so every number is the same length, such as
000001.
Put together, the first page is DOE-000001, the next is DOE-000002, and so on. If you hand over 340 pages, they run from DOE-000001 to DOE-000340. People write that range as "DOE-000001 to DOE-000340."
Page numbers vs. Bates numbers
People mix these up. They do different jobs.
| Feature | Page numbers | Bates numbers |
|---|---|---|
| What it counts | Pages within one document | Every page you produce, across all documents |
| Starts over? | Yes, each document starts at 1 | No. It keeps going from where the last batch stopped |
| Typical look | "Page 3 of 12" | DOE-000415 |
| Main use | Reading and citing one filing | Tracking documents handed over in discovery and citing them later |
A page can have both. For example, an exhibit might show "Page 2 of 5" at the bottom center and DOE-000417 at the bottom right.
When you'll need Bates numbers
Bates numbers show up most in discovery. Discovery is the stage where each side must share relevant documents and information. Our pro se discovery guide covers the whole process.
When the other side sends you a request for documents under FRCP 34, the rule says you must produce them as they are kept in the usual course of business, or organize and label them to match the categories in the request (FRCP 34(b)(2)(E)(i)). The rule does not mention Bates numbers. But numbering each page is the usual way people keep track of what was produced. It also makes it easy to show later exactly what you handed over.
You may also see Bates numbers in:
- Exhibits and appendices. When you attach documents to a motion, citing "DOE-000212" points the judge to one exact page.
- Court orders. A scheduling order, a discovery order, or an order about electronically stored information (often called an "ESI order") may say how documents must be numbered. Under FRCP 26(f)(3)(C), the parties' discovery plan must cover issues about electronically stored information, including the form it should be produced in.
- Local rules. Some districts or judges have their own rules about numbering exhibits or discovery.
- The other side's documents. Lawyers almost always Bates-number what they send you. Use their numbers when you cite their pages.
If an order or the other side asks for a specific format, follow it exactly. That includes the prefix, the number of digits, and where the stamp goes. Check your court's local rules and your judge's orders, and any discovery agreement you signed.
Rules of thumb for clean Bates numbering
There is no single national rule. These habits are common practice and keep you out of trouble:
- One number per page, no gaps. Every page gets a number. Don't skip numbers. A gap makes people wonder what is missing.
- Never reuse a number. Once
DOE-000050is used, it belongs to that one page forever. - Keep counting across batches. If your first production ended at
DOE-000340, the next one starts atDOE-000341. Don't start over at 1. - Use one prefix for your documents. Keep it short and consistent. Don't change it partway through the case.
- Stamp copies, not originals. Keep a clean, unstamped set for yourself.
- Don't cover the content. Put the stamp in a margin, usually the bottom right. If it would cover words, a signature, or part of a photo that matters, adjust the margin first.
- Keep a production log. Write down every range you send out (see the sample below).
PRODUCTION LOG — [Case No.]
Date sent | Bates range | Pages | Sent to | What it is
[date] | DOE-000001 – DOE-000340 | 340 | [Opposing counsel] | Response to [First] Request
| | | | for Production, Nos. [1–6]
[date] | DOE-000341 – DOE-000402 | 62 | [Opposing counsel] | Supplemental production,
| | | | Request No. [4]
[date] | DOE-000403 – DOE-000420 | 18 | [Court, Exhibit B] | Exhibits to [motion name]The log takes a minute to keep and can save hours later. If someone claims you never sent a document, you can show the range, the date, and who got it.
Bates numbers identify pages. They don't fix other problems. Before you produce or file anything, redact private details like full Social Security and account numbers. Our CM/ECF PDF requirements guide lists what FRCP 5.2 says to hide.
How to add Bates numbers free with ECF PDF
ECF PDF has a built-in Bates option. It runs in your browser, and your files never leave your device. Here is how to use it.
- Add your pages. Open the tool and drop in your photos, scans, and PDFs. Drag them into the order you want them numbered. Rotate any sideways pages.
- Turn on Bates numbers. In the Stamps section, switch on "Bates numbers."
- Type your prefix. Type it exactly as you want it to appear, including any dash. If you type
DOE-, the stamp readsDOE-000001. If you typeDOE, it readsDOE000001. - Set the start number. Use 1 for your first batch. For a later batch, enter the next number after your last one. If your last page was
DOE-000340, enter 341. - Choose page numbers too, if you want. "Page numbers" adds "Page 3 of 12" at the bottom center. You can use one, both, or neither.
- Set your court's size limit. Enter your court's file-size limit and keep "Split if over the limit" on.
- Build. Click Build PDF. The tool shows each file it made, with its page count. Write the range in your log.
What the stamps look like
The tool prints the Bates number in the bottom-right corner of every page. The number is always six digits, padded with zeros. A small white label sits behind it so it stays readable on dark pages. On pages built from photos, the tool leaves space at the bottom for the stamps. On PDFs you add, the stamp is placed on top of the existing page, so check that corner on each page.
Split files keep counting
If your set is too big for one upload, the tool splits it into parts that each fit your limit. The Bates numbers keep going across the parts. If part 1 ends at DOE-000150, part 2 starts at DOE-000151. Page numbers, on the other hand, start over in each part, because each part is its own file.
If you turn on the exhibit cover sheet, that cover becomes the first page of the first file. It gets a Bates number too. If you don't want the cover numbered in your production, build it separately.
Turn on Bates numbers, set your prefix, and build. ECF PDF stamps every page, keeps counting across split files, and checks each file against your court's size limit. Free, no account, and nothing is uploaded.
Open the free tool →Sending and citing Bates-numbered pages
Discovery documents usually go to the other side, not to the court. Send them the way you agreed or the way the request asked, such as by email or on a USB drive. Include a short cover letter that lists the Bates range and which requests the documents answer.
Later, when you file a motion and want the judge to see one of those pages, attach it as an exhibit. Cite it by its Bates number in your brief, for example: "See Ex. B at DOE-000212." Our guides on formatting exhibits and federal court formatting requirements cover how to label and attach them.
If you make a numbering mistake
Catch it before you send anything, if you can. Rebuild the set with the right start number and check the first and last pages of each file. If a mistake already went out, don't quietly fix it. Write to the other side, explain what happened, and send a corrected set with a clear note about which range replaces which. Then update your log so the record stays clean.
When you receive the other side's documents, keep them exactly as stamped. Don't re-stamp their pages with your own numbers. Cite their numbers so everyone is looking at the same page.
Common questions
What does Bates stamp mean?
To Bates stamp means to put a unique ID number on every page of a set of documents, usually a short prefix plus a number like DOE-000001. It lets everyone in a case point to the exact same page.
Do the Federal Rules require Bates numbering?
Not by name. FRCP 34 says documents must be produced as they are kept in the usual course of business or organized and labeled to match the request. Bates numbering is the common way to do that, and a court order, local rule, or discovery agreement may require it.
Should my Bates numbers start over for each new production?
No. Keep counting from where your last production ended. If your last page was DOE-000340, the next batch starts at DOE-000341. This keeps every page number unique for the whole case.
What is the difference between page numbers and Bates numbers?
Page numbers count the pages inside one document and start at 1 each time. Bates numbers count every page you produce across all documents and never repeat.
Can I add Bates numbers without Adobe Acrobat?
Yes. ECF PDF adds Bates numbers free in your browser. You set the prefix and starting number, and the numbers continue across files if the set is split to fit your court's size limit.
Turn on Bates numbers and build
Set your prefix and starting number, add your pages, and download stamped PDFs that stay under your court's size limit. Numbers continue across split files. Free, private, and nothing is uploaded.
Keep reading
Sources
- Federal Rule of Civil Procedure 34: Producing Documents and Things — Legal Information Institute
- Federal Rule of Civil Procedure 26: Duty to Disclose; General Provisions Governing Discovery — Legal Information Institute
- Current Rules of Practice and Procedure — uscourts.gov
Not legal advice. This guide explains general federal court procedure in plain English. Rules change, and your court's local rules and your judge's orders control. ECF PDF is an independent tool and is not affiliated with any court or with PACER. If you can, talk to a lawyer, a law school clinic, or your court's pro se help desk about your case.